bradyvolpe.com

DOCSIS 1.0 enabled data over coax with a “best effort” service using a data request-grant methodology. DOCSIS 1.1 and subsequent specifications added guaranteed Quality of Service (QoS) by providing Unsolicited Grant Synchronization (UGS) which means that a cable modem does not have to send a data request in order to receive a bandwidth grant from the CMTS. The new UGS service is an enabling technology which has allowed cable operators to successfully deploy the highly revenue generating Voice-over-IP (VoIP) services. In the following sections I will illustrate the differences between best-effort (request-grant) and QoS (UGS) services.

While the UCD provides the language of the DOCSIS network, the Station Maintenance messaging is the proverbial “heartbeat” of the DOCSIS network. A station maintenance session consists of a Range Request sent from a cable and a Range Response sent by the CMTS. The CMTS analyzes the signal quality of the Range Request message and sends back any necessary RF adjustments in the Range Response message. This “handshake” between every cable modem and the CMTS must occur once every 30 seconds as dictated by the DOCSIS specification.

Just as a picture is worth a thousand words, so is a complete Upstream Channel Descriptor (UCD) as seen by a cable modem. This message, sent every two seconds by the the CMTS, contains an enourmous amount of valuable information that every cable modem on a DOCSIS network needs to know in order to communicate. Often undervalued, the UCD is a virtual Hitchiker’s Guide to the DOCSIS network! So without any further ado, let me show you an example of a full UCD message and then explain its contents further